0 Motorola Rocker E1 Display atau Screen Problem

Motorola Rocker E1 Display atau Screen Problem



No IMEI 356856002672645
Mr.Ddk
No Telp : ---

HP Motorola rocker E1 milik tetangga di belakang counter dibawa ke counter dengan kerusakan tampilan layar tidak karuan atau istilah di dunia HP disebut display problem atau screen problem.
Langkah yang saya kerjakan adalah lakukan flashing dengan software Flash&Backup,saya menggunakan firmware
Dan Alhamdulillah proses flashing berjalan lancar dan HP normal kembali.
Biaya service 42.000 rupiah.

Berikut log nya :

flashing E1 (SCREEN PROBLEM)
menggunakan flash backup v.3.07
firmware R373_49RSWmodelektro255_NSF_Mod_Michelbr_for_Rokr.shx



*** Operation start (9/26/2009 7:03:24 PM) ***
Flash&Backup 3.0.7
Read data: E:\Motorola\Log f&b\2009-09-26_190324\...

Sending the loader...
Done.
Executing JUMP...
Done.
Reading the code group: CG1
Done.
Reading the code group: CG2
Done.
Reading the code group: CG3
Done.
Reading the code group: CG4
Done.
Reading the code group: CG7
Done.
Reading the code group: CG15
Done.
Reading the code group: CG18
Done.
Compressing data...
Operation done.

*** Operation end (9/26/2009 7:10:11 PM) ***

------------------------------------------------------

*** Operation start (9/26/2009 7:14:39 PM) ***
Flash&Backup 3.0.7
Write data: E:\Motorola\FIrmware\ROKR
E1\R373_49RSWmodelektro255_NSF_Mod_Michelbr_for_Rokr.shx

Extracting data from firmware file...
Sending the loader...
Done.
Executing JUMP...
Done.
Erasing memory... (Progress of this process is not shown)
Done.
Sending code group: CG1
Done.
Sending code group: CG2
Done.
Sending code group: CG3
Done.
Sending code group: CG4
Done.
Sending code group: CG7
Done.
Sending code group: CG15
Done.
Sending code group: CG18
Done.
Operation done.

*** Operation end (9/26/2009 7:23:02 PM) ***

Ternyata tidak ada file Bahasa Indonesianya,jadi saya teruskan dengan proses BI,berikut log proses BI :

*** Operation start (9/26/2009 7:31:00 PM) ***
Flash&Backup 3.0.7
Write data: E:\Motorola\FIrmware\e398\LP_Indojowo.shx

Extracting data from firmware file...
Sending the loader...
Done.
Executing JUMP...
Done.
Erasing memory... (Progress of this process is not shown)
Done.
Sending code group: CG4
Done.
Operation done.

*** Operation end (9/26/2009 7:31:34 PM) ***